Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Cost in Park Slope?
Garage door repair in Park Slope typically costs $150 – $600, depending on what failed and how many parts are involved. A single spring replacement usually runs $180 – $340, while a complete new door installation runs $700 – $2200. These are estimated ranges for the Park Slope market in 2026; the written estimate we give you after looking at the door sets the final price.
Most of the calls we take in Park Slope fall into a few predictable categories: a snapped spring, an opener that hums but won’t lift, a door that came off its track, or a panel that took a hit. Each of those has its own price band, and knowing roughly where your problem lands helps you decide whether to book a repair today or plan a replacement. We connect you with local professionals who are licensed and insured as their state requires, and estimates are free.
Key Takeaways
- Typical garage door repair in Park Slope: $150 – $600.
- Spring repair: $180 – $340 for one spring. A matched pair is usually replaced together, so a pair runs about twice that.
- Opener repair: $120 – $320. Opener installation: $250 – $550.
- New door installation: $700 – $2200, depending on size, material and insulation.
- Estimates are free, and same-day service is available for doors that won’t close or won’t open.
Garage Door Cost Breakdown (2026)
Here’s how the numbers break down for Park Slope homes. All ranges are typical estimates. The written estimate is what you pay.
| Service | Typical Estimated Range |
|---|---|
| Spring repair (one spring) | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2200 |
| General garage door repair | $150 – $600 |
What Each Line Item Covers
- Spring repair ($180 – $340 per spring). Torsion springs mounted above the door or extension springs along the tracks. Because springs are matched to the door’s weight, a pair is normally replaced together, which costs about twice the single-spring range. This is the repair to treat with the most caution: a wound spring stores serious tension, and the winding bars and knowledge to release it safely aren’t something to improvise.
- Cable repair ($130 – $250). Lifting cables that run alongside the door and spool onto the drums. A frayed or snapped cable usually means the door lifts crooked or not at all.
- Opener repair ($120 – $320). Motor, gear, logic board, travel limits, safety sensors, or connectivity issues. We work on LiftMaster, Chamberlain, Genie and Craftsman openers, the brands most common on residential doors.
- Opener installation ($250 – $550). A new unit hung from the ceiling, wired and paired to your remotes and keypad.
- Panel replacement ($250 – $500). One or more damaged sections swapped out. Dents, cracks and impact damage are the usual reasons.
- Track realignment ($120 – $240). Straightening bent vertical or horizontal track so the rollers run true.
- Roller replacement ($110 – $220). Worn rollers cause noise, vibration and uneven travel. Replacing all of them at once is standard.
- New door installation ($700 – $2200). A complete new door and hardware, sized and balanced to the opening. We install Clopay, Amarr, Wayne Dalton and Raynor, which covers the range from builder-grade steel up to architectural-grade panels.
- General repair ($150 – $600). A catch-all for jobs that mix two or more of the above.
What pushes a job toward the top of its range: a door that needs more than one system repaired, a two-door garage, insulated or oversized panels, or a door that sat broken long enough to bend the tracks too. What keeps it low: a single failed part, a brand we already know by heart, and a door that’s still balanced so no adjustment is needed. When a broken spring or stuck door can’t wait, call us and we’ll book emergency service, with fast dispatch from 7am to 7pm. If you’re coming to us from a nearby neighborhood, our garage door repair Crown Heights team works on the same brands and the same price logic.
What Affects Garage Door Pricing in Park Slope
Park Slope isn’t a one-size housing market, and that shows up in garage door costs. Most homes here are in the three- to four-story rowhouse and brownstone style, with a mix of detached garages, attached carriage-house style garages, and converted spaces. A few factors move the price more than anything else:
- Door size and configuration. Single-car openings are the most common in Park Slope, but a two-car door nearly doubles the material in springs, cables and panels. Two separate doors means two sets of hardware, even if it’s one job.
- Brand and model of what’s already there. We service Clopay, Amarr, Wayne Dalton and Raynor doors and LiftMaster, Chamberlain, Genie and Craftsman openers. When the door and opener are on that list, we’re working with a known system rather than reverse-engineering it, which keeps labor predictable.
- Spring type and pair replacement. Torsion springs (mounted above the door) and extension springs (mounted alongside) take different methods and times. A pair is usually replaced together because springs wear at the same rate. Budget about twice the single-spring range when both go.
- Age and deterioration of the tracks and rollers. A door that’s been out of service for a while often has bent track or seized rollers on top of the original fault. Fix the secondary problems in the same visit and you avoid a second call.
- How quickly you call. A door left hanging or propped open risks bending the tracks and twisting the panels. Nothing on this page beats getting an estimate early. If the door won’t close and the house is open to the street, treat it as urgent.
- Insulation and material on a new door. Steel is the standard, but insulated panels, glass sections and custom sizes push a new install toward the top of the $700 – $2200 range. Weigh what you need against the price, not what the catalog talks you into.
Repair or Replace? Park Slope Price Math
For a single failed part on a door that’s otherwise sound, repair wins on cost almost every time. A $180 – $340 spring replacement or a $120 – $320 opener repair is far cheaper than a new door, and the door keeps working the same week. Replace when the door itself is the problem: multiple cracked panels, a frame that’s rusted through, or a door that has needed three or four separate repairs in a short stretch. At that point the $700 – $2200 install range starts to look reasonable against repeated smaller bills, and a new door comes with new springs, cables and hardware already in the price.
The middle ground is trickier. A door with one bad panel and good springs is a $250 – $500 panel job, not a replacement. A door with a bent track, worn rollers, a noisy opener and tired springs may still be repairable, but only if the total lands under the replacement range. That’s exactly what a written estimate is for. We look at the door and opener together, because a “spring problem” sometimes turns out to be a cable or an opener that’s failing to lift a door whose springs are fine.
How to Save on Garage Door Repair and Installation in Park Slope
- Get one clear written estimate before anyone touches the door. Ask what’s included: parts, labor, disposal of the old door, and any adjustment of the opener. A range isn’t a bill; the written estimate is.
- Repair the pair, not just the one that broke. When one spring fails, the other has lived the same life and is usually close behind. Replacing both in one visit costs about twice the single-spring range but avoids a second call weeks later.
- Bundle two problems into one visit. If the opener is struggling and the rollers sound like a train, fix both at once. One visit, one labor minimum.
- Keep the door you install serviced. A door that needs a repair every few months is telling you something. A quick check of springs, cables and rollers at the first sign of trouble is cheaper than a breakdown.
- Compare the repair range to the replace range with the door’s condition in front of you. If the repair quote climbs into the new-door range, ask for both numbers before deciding.
- Ask about the opener too. Opener repair ($120 – $320) is often a fraction of what a homeowner expects, so if the door lifts by hand and not by remote, get it looked at.
Free estimates make the comparison easy. Call (833) 721-7259 with the door size, the brand if you know it, and what the door is doing or not doing. We’ll tell you the likely range and book a visit. For homes with older or unusual setups, we can walk you through what a new install involves before you commit.
Do I Need to Be Home for the Estimate or the Repair?
For an estimate, yes, ideally, so you can see what the technician points out and ask questions. For the repair itself, many Park Slope homeowners with a detached garage or an openable side door arrange access by phone. The one thing to avoid: leaving the door in an unsafe state. A door with a broken spring can slam if released, so don’t try to open or close it by force before the technician arrives. Our technicians have up to 15 years of experience, and part of that is knowing exactly how to stabilize a door before working on it.
Why Get a Garage Door Specialist Rather Than a General Handyman?
Some jobs are fine as handyman work. A broken garage door is not one of them. Springs are the most hazardous part of the whole system, and the result of a botched repair ranges from a door that won’t stay down to serious injury. We service 8 leading brands, which means whatever’s already on your home is something we’ve worked on rather than figured out on the spot. That covers springs, cables, tracks, panels and openers, and it means one call handles the whole system instead of two separate contractors and a scheduling gap between them. If you’re working through a decision on the whole system, it helps to compare the repair numbers against what a fresh install costs before you commit. Knowing the opener and door install ranges side by side, for example, is often what settles a “should I replace?” question. For an even wider look at what other work involves, the difference between a minor tune-up and a full install runs through the same price bands.
FAQs – Garage Door Cost in Park Slope
How much does garage door repair cost in Park Slope?
A typical garage door repair in Park Slope costs $150 – $600, with single-part jobs toward the low end and mixed repairs toward the high end. Spring repair runs $180 – $340, cable repair $130 – $250, and opener repair $120 – $320. Call (833) 721-7259 for an exact quote, since estimates are free and the written estimate sets the final price.
Is it cheaper to repair or replace a garage door?
Repair is usually cheaper when a single part has failed: a spring replacement at $180 – $340 is far less than a new door at $700 – $2200. Replacement makes more sense when the door itself is failing, or when the total repair cost climbs near the installation range. The written estimate should show you both options if the numbers are close, and you decide from there. Call (833) 721-7259 and ask for both.
How much does a new garage door cost in Park Slope?
A new garage door installation in Park Slope typically costs $700 – $2200. The low end is a standard single-car steel door. The high end covers insulated panels, larger openings and architectural-grade material. We install Clopay, Amarr, Wayne Dalton and Raynor, so you’re choosing from real options rather than one brand. Call (833) 721-7259 for a free estimate on the door that fits your opening.
Can you replace just one spring, or do I need both?
You can replace one spring, but most technicians recommend the pair, because both springs carry the same load and wear at the same rate. One spring runs $180 – $340. A matched pair is usually replaced together, so a pair costs about twice that range. Call (833) 721-7259 if you’re not sure whether one or both have gone.
How much does garage door opener repair cost in Park Slope?
Opener repair in Park Slope typically costs $120 – $320. That covers the motor, gears, logic board, safety sensors and connectivity issues on LiftMaster, Chamberlain, Genie and Craftsman units. If the opener can’t be repaired, a new installation runs $250 – $550. Call (833) 721-7259 for a free estimate, and we’ll tell you which way it’s likely to go.
How much does garage door spring repair cost in Park Slope?
Garage door spring repair in Park Slope typically costs $180 – $340 for one spring. Torsion and extension springs are priced in the same band, since the labor and safety work are comparable. A matched pair is usually replaced together, so a pair runs about twice that. Call (833) 721-7259 and we can book same-day service if the door is stuck.
Get a Free Estimate in Park Slope
The best way to turn any of these ranges into a real number is a quick call. Tell us the door size, the brand if you know it, and whether the door is stuck open, stuck closed, or just acting up. We’ll give you the likely range and book a visit. Repairs are handled with upfront pricing, our work is backed by a satisfaction guarantee, and the local pro who arrives is licensed and insured as their state requires. Call (833) 721-7259 for a free estimate.
Pricing reflects the Park Slope market as of 2026. Garage Door Repair Crown Heights offers free estimates – call (833) 721-7259.
What Our Customers Say
"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
- Michael Kowalski"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
- Emily Delaney"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Erin Meyer